Sliding Access Panel allows easy, tool free access to the inside of a duct
Nordfab® QF® Sliding Access Panel allows users easy, tool-free ducting access to clean out any clogs or gain access to spark detection/suppression equipment without removing any pipe. It commonly replaces the problematic bolt-on clean out doors that are traditionally used in ducting.
Its design is simple: a sleeve slides to either cover or allow access to a large 7" x 14" opening laser-cut into a standard 5-foot length of QF® pipe. The sleeve can be secured and held tightly in place with two standard QF® Clamps and O-Rings, with minimal leakage. The access opening is laser cut into the pipe and very smooth so there's no reason to file or "clean up" around a ragged hole.
Watch the video below to review how to operate this Sliding Access Panel.
It's comes in 6" - 24" diameters with all of the parts shown in the pictures. It's pre-assembled and ready to use so installers simply clamp the pipe into place.
- 6" - 24" diameters
- 7" x 14" access/viewing panel
- laser cut for minimal cleaning
- 18" Sliding Length
- 5' Pipe
- Clamps & O-rings diameter matches the diameter of pipe
- Allows access to inside of duct
- remove clogs
- access spark detection equipment
- Quick, simple assembly