EcoMAXX Spark Detection & Extinguishing System - BOSS Products

Spark Detection and Extinguishing System

BOSS Products
SKU:
EM-FCS

Contact us for Pricing & Ordering. Give us a call at (800) 878-7309 or email mail@biscoair.com.

(No reviews yet)
Current Stock:
Description

All In One Spark Detection and Fire Suppression for Dust Collection Systems

In the presence of combustible dust, all it takes for an explosion or fire to occur is a single spark. Achieve total protection of your facility and avoid the risks of property damage, production delays, and fatal injury with this Spark Detection and Extinguishing System. 

The Raptor Spark™ Detection and Extinguishing System is an FM APPROVED safety device that is designed to detect and extinguish sparks and glowing embers that are traveling through a duct system. The hazard is detected by infrared sensors and extinguished with water spray nozzles within milliseconds of detection.

The High Power Raptor Spark™ control module has the capacity to receive hazard alert signals from multiple components (Dust Probes & Thermal Probes) and monitor multiple duct-zones and vessels. The Raptor Spark™ Detection and Extinguishing System is an essential Explosion Protection, Fire Isolation and Diversion device that is commonly installed with EcoMAXX® High Speed Abort Gates, FireBreak Shutters, EcoMAXX®/VigilEX Explosion Vents and explosion certified EcoMAXX®/VDL Rotary Valves. Typical automatic functions include hazard detection, system shut-down, isolation/abort, and extinguish and/or suppression.

Standard Features
  • Output for Pre-Alarm
  • Output for Alarm
  • 4-20mA proportional output
  • Bus RS485
  • IP65 Enclosure

Optional Features
  • Magnetic
  • Pneumatic
  • Fusible Link

Certifications & Standards
  • Models P and MA
    • ATEX EN 1366-2, EN 13501
    • CSI 1643FR, REI 120-RE 120
    • CE

Components

RS Raptor Spark™ Detection & Extinguishing Control Module

PRODUCT CODES: 56501

The Raptor Spark™ Spark Detection & Extinguishing Control Module is designed to minimize the risk of fire and explosion in dust filtration and pneumatic conveying systems. This Control Module communicates with a variety of Яaptor Spark™ Components to monitor and protect up to five individual zones.

RS-EXT02 Raptor Spark™ Extinguishing Assembly

PRODUCT CODES: 56504

The Raptor Spark™ FM Approved Extinguishing Assembly is designed to work in conjunction with the RS-CUSP1L Control Module and RS-SD02 Spark Detectors. When the control module gets a signal that a hazard has been detected, the extinguishing assembly is activated. A water spray is initiated inside the piping system to extinguish sparks or glowing embers that could cause fire or explosion.

RS-SD02 Raptor Spark™ Spark Detector (Infrared Sensor)

PRODUCT CODES: 56502

The Raptor Spark™ Spark Detector was designed to work with the RS-CU16100SD Control unit. The Spark Detector is used to detect sparks and glowing embers in systems containing combustible materials.

RS-TL02 Raptor Spark™ Test Lamp

PRODUCT CODE: 54603

The EcoMAXX® Fire Break Shutters are engineered to isolate fires and fire hazards in process ventilation and dust collection applications. The Fire Break Shutter can be activated by the RS-CU16100SD Control Unit via Spark Detection or sensing activation by Thermal Probe.

 

 

If you are interested in this system, contact us to get started assembling one built specifically for your application.