Y Branches to split air within Flanged Applications evenly.
Nordfab Flanged Duct Branches in Y shape (sometimes called “true wyes”) that provide optimal air flow if it's the final, or only, branch in the ducting. It splits the air almost 50/50 which is the closest to even you can get using standard parts.
When ordering make sure to fill out A, B, and C correctly. Both B & C each must be at least 50% of A, with B or C being at least 80% of the opposite leg. Contact Us for help ordering or to order larger sizes and custom gauges, materials and end types.
Flanged A end is standard. If flanged ends are required on B and/or C ends, select those options above. The flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections.
Available with QF ends in diameters up to 24" and other end types upon request.
Product Features
- 3" - 24" Diameters
- Some diameter configurations aren't available
- 60° or 90° angles
- Y shape that splits the air nearly 50/50
- For flanged end applications
Product Specifications
| Diameter | 3 - 24 inch |
| Length | A + 4" |
| Gauge | ≤12":22ga, ≥13":20ga |
| Material | Galv, 304SS |
| Duct Type | Flange |
| Edge | Van Stone Lips |
Info & Guides
- Technical Data Sheet, Nordfab Y-Branch
- Temperature Guide, Nordfab Ductwork
- General Specifications, Nordfab Ductwork
Questions & Answers
How do I connect to the end of an existing non QF system?
We offer a full line of adapters to connect to any existing pipe you might have.
When do I need to use stainless steel?
Stainless steel is used in FDA, chemical and high temperature applications.
Still have questions?
Browse our frequently asked questions page or contact us.
|
