Bridge Clamps for Flex Hose.

Bridge Clamps are designed to fit over the helix and create a leak proof seal. The clamp aligns with the spiral support on wire duct hose to provide a tight seal. They're also known as worm-drive clamps.

Clamps have very good corrosion resistance. Do not exceed the maximum torque or clamps may be damaged. They are constructed with a stainless steel band and a welded stainless steel bridge with a stainless steel screw. They are available in sizes from 2" to 20" with clockwise or counter clockwise designs.

When looking at the end of your hose, a right-hand spiral twists away from you clockwise; a left-hand spiral twists away from you counterclockwise.

Most hoses utilize a clockwise (right-hand) spiral. Hoses in the Reinforced Flex and Tubular Flex lines utilize a counter-clockwise (left-hand) spiral.

When choosing and sizing for a bridge clamp, measure the outside diameter of your hose with the fitting installed.

Bridge Clamps are available for these flex hose brands:

Clockwise Spiral

Counter Clockwise Spiral