Close

Shop Products

Site Information

Dry Chemical Suppression

Shop Products

The Ultimate Protection Solution for METALWORKING APPLICATIONS where multiple sparks and/or flames are present.

EcoMAXX™ Fire Isolation & Suppression Systems combine patented and FM approved FireTrace Technology with the standard EcoMAXX™ Fire Control Panel, Detection Sensors and FireBreak Isolation Shutters.

As a first line of defense, the EcoMAXX™ system detects potential fire events at a predetermined level. It then isolates the filter from exposure, shuts the system down, and optional suppressant may be released.

 

Standard Features include a NEMA 4/12 enclosure for indoor and outdoor installations, Single Point 24VDC electrical connection, 2 Discharge Hose Bulkheads located on enclosure sides, Manual release and charging port on enclosure door, and 4 different cylinder sizes. However, we will customize each of these components to make sure that the system works optimally in your setting. Get started here.

firetrace-logo.png

 

How It Works:

Dry Chemical Suppression Process

Stage 1 – Prevention

Spark Detectors detect multiple pulses of sparks and or a flame and send a signal to the Fire Control Unit. The Fire Control Unit shuts down the dust collector, activates visual/audible alarms and sends a signal to close the FireBreak Shutter to isolate the hazard from entering the collector. 

Stage 2 – Isolation & Suppression

Thermal Probes installed in the clean air chamber and hopper sense a rapid temperature rise in the dust collector and send a signal to the Fire Control Unit. The Fire Control Unit then shuts down the dust collector, activates visual/audible alarms and sends a signal to close the FireBreak Shutters on the inlet side and on the dust collector outlet. After a slight delay, to ensure FireBreak closure, the Dry Chemical Suppression System floods the dust collector to suppress the fire.

The Dust Probe monitors the filtered air for particulate and shuts the system down to protect workers from hazardous dust when air is returned to the workspace.

 

If you are interested in this system, Contact Us to get started assembling one built specifically for your application.

 

    There are no products in this category.